Tenon Intersystems Please see text links at bottom of page for navigation Please see text links at bottom of page for navigation
Please see text links at bottom of page for navigation Please see text links at bottom of page for navigation
Please see text links at bottom of page for navigation
Google
Search this site:



FAQ all FAQ for this program Search
iTools 7 : Installing, Upgrading, or Removing : Swapping WebSTAR & MacRadius for iTools 7 and Radicate Print send FAQs by e-mailask a question
Question:I am swapping out my old WebSTAR and MacRadius server to one with Mac OS X that has iTools 7 and Radicate (the new Radius server for Mac OS X) installed.

I would like to simply renumber the new machine to the old machine's IP address. Will this be problematic?
Answer:This will be fine. Renumber the iTools 7 machine first in an isolated environment and test that the IP address and the websites are functioning properly. If everything works as expected, then power down both the iTools machine and the WebSTAR machine. Disconnect WebSTAR from the net and connect the iTools machine to the net. Then power on the iTools machine and you should be done.
last updated 17.05.2003
[previous FAQ]   [next FAQ]
List FAQ in this category | List categories | List all FAQ | List programs goto top

| Tenon Home | Products | Order | Contact Us | About Tenon | Register | Tech Support | Resources | Press Room | Mailing Lists |

Powered By iTools

Copyright©2013 Tenon Intersystems, 232 Anacapa Street, Suite 2A, Santa Barbara, CA 93101. All rights reserved.
Questions about our website - Contact: webmaster@tenon.com.


Tenon Home  Tenon Home  Tenon Home  Tenon Home Product Info  Tenon Ordering Contact About Register Support Resources Press Mailing Lists