Tenon Intersystems Please see text links at bottom of page for navigation Please see text links at bottom of page for navigation
Please see text links at bottom of page for navigation Please see text links at bottom of page for navigation
Please see text links at bottom of page for navigation
Google
Search this site:



iTools 7 : Installing, Upgrading, or Removing : Swapping WebSTAR & MacRadius for iTools 7 and Radicate back to FAQ
Question:I am swapping out my old WebSTAR and MacRadius server to one with Mac OS X that has iTools 7 and Radicate (the new Radius server for Mac OS X) installed.

I would like to simply renumber the new machine to the old machine's IP address. Will this be problematic?
Answer:This will be fine. Renumber the iTools 7 machine first in an isolated environment and test that the IP address and the websites are functioning properly. If everything works as expected, then power down both the iTools machine and the WebSTAR machine. Disconnect WebSTAR from the net and connect the iTools machine to the net. Then power on the iTools machine and you should be done.
last updated 17.05.2003
Powered by FAQEngine V4.07.4 ©2001-2005 Bösch EDV-Consulting