Hmmm...
I managed to get all the email address out. Now I went to re-import
them and I get an error:
Failed to subscribe xxx@xxxxxxx
importing xxx@xxxxxxx
There is no local user with the specified address.
the only thing I changed was the confirm unsubscribe. Any ideas what
else I munged without knowing?
Thanks!
Jim
On Thu, 20 Feb 2003 03:07:08 -0800, Eric Pooch wrote:
> Actually, don't put the "immediate" part. this was a typo - It might not
> make a difference.
>
> --Eric
>
> on 2/20/03 3:04 AM, Eric Pooch at eric@xxxxxxxxx wrote:
>
>> Jim,
>>
>> you need to do a little trick with the cmdutils in The Terminal:
>>
>> cd /usr/local/post.office/cmdutils
>>
>> ./listsubscribers Post_Office - | ./unsubscribe -q -f -i - Post_Office
>> immediate
>>
>> That should all be on one line. replace Post_Office with your list
>> name. you
>> should see this name in the Descriptive Information section of the list
>> administration.
>>
>> the -q does it w/o notifying users.
>>
>> --Eric
>>
>>
>>
>> on 2/20/03 2:30 AM, Jim Sheffer at jimsheffer@xxxxxxxxxxxxx wrote:
>>
>>> Thanks Eric-
>>> I just found an east way to get rid of the name by importing the list
>>> into excel then exporting just the email addresses.
>>>
>>> how do I delete ALL subscribers to a list without deleting the list?
>>> thanks
>>>
>>> Jim
>>>
>>>
>>> On Thu, 20 Feb 2003 02:28:38 -0800, Eric Yang wrote:
>>>> Jim,
>>>>
>>>> The script is designed to import the one with a name only.
>>>> You can enable the script to import address without a name by editing
>>>> import.LetterRip script.
>>>>
>>>> In line 26:
>>>> if($name ne "") {
>>>> comment out this line with a # sign in the beginning of the line.
>>>> In line 29:
>>>> }
>>>> put another # sign in front of this line to close the closure.
>>>> This will enable your script to import address without a name.
>>>> Hope this helps.
>>>>
>>>> regards,
>>>> Eric
>>>>
>>>> On Thursday, February 20, 2003, at 01:55 AM, Jim Sheffer wrote:
>>>>
>>>>> Ok, I hit a snag.
>>>>> I used the import.LetterRip command, using an imported test list from
>>>>> letterrip.
>>>>> the list had 2 addresses, one with a name and address and the next with
>>>>> only an address
>>>>>
>>>>> It only imported the one with a name (first one).
>>>>> any ideas on how I can fix this- I've got some lists with 10's of
>>>>> thousands of subscribers, not all woth names...
>>>>>
>>>>> Thanks again!
>>>>>
>>>>> Jim
>>>>>
>>>>>
>>>>> On Thu, 20 Feb 2003 00:53:40 -0800, Jim Sheffer wrote:
>>>>>> Thanks to all- Eric, Nitai, Ken, Glenn, Bear, Elton, Mark and probably
>>>>>> others :)
>>>>>>
>>>>>> I think It's sinking in, finally.
>>>>>>
>>>>>> I'm going to mull it over a bit while I switch gears and try moving a
>>>>>> list or two over from letterrip and see how that goes.
>>>>>>
>>>>>> I have to admit, I haven't had nearly the time I would have liked to
>>>>>> muck about with post.office before trying to move all our lists over,
>>>>>> but the docs are good, the people here on the list are great, and the
>>>>>> program itself, although different then what I'm used to, is starting
>>>>>> to grow on me :)
>>>>>>
>>>>>> I'm sure i'll have some more questions later on this morning!
>>>>>>
>>>>>> Jim
>>>>>>
>>>>>>
>>>>>> On Thu, 20 Feb 2003 00:36:40 -0800, Eric Yang wrote:
>>>>>>> Jim,
>>>>>>>
>>>>>>> Here is your example revised for Post.Office:
>>>>>>>
>>>>>>> widgets1.com
>>>>>>> When creating email for Jim. Let's say his last name is Smith.
>>>>>>> In "Primary Email Address", put:
>>>>>>> jim@xxxxxxxxxxxx
>>>>>>> Put a check mark on "POP3/IMAP4 Delivery".
>>>>>>> POP3/IMAP4 Login name:
>>>>>>> jimsmith
>>>>>>>
>>>>>>> widgets2.com
>>>>>>> When creating email for Jim Parker.
>>>>>>> In "Primary Email Address", put:
>>>>>>> jim@xxxxxxxxxxxx
>>>>>>> Put a check mark on "POP3/IMAP4 Delivery".
>>>>>>> POP3/IMAP4 Login name:
>>>>>>> jimparker
>>>>>>>
>>>>>>> Post.Office does not support @ sign in POP3 login name. Therefore,
>>>>>>> the user name must be unique. However, this does not prevent users
>>>>>>> for having the same email id before the @ sign in their email
>>>>>>> address.
>>>>>>> In addition, the POP3 login name does not have to be the same as the
>>>>>>> id before the @ sign.
>>>>>>> Hope this helps.
>>>>>>>
>>>>>>> regards,
>>>>>>> Eric
>>>>>>>
>>>>>>> On Thursday, February 20, 2003, at 12:10 AM, Jim Sheffer wrote:
>>>>>>>
>>>>>>>> What if I have company 1 with three people:
>>>>>>>> jack
>>>>>>>> jill
>>>>>>>> jim
>>>>>>>>
>>>>>>>> Through a custom interface, they can sign in and see all the email
>>>>>>>> addresses for their domain, widgets1.com.
>>>>>>>>
>>>>>>>> They want an email address for each of them with their first names:
>>>>>>>> jack@xxxxxxxxxxx
>>>>>>>> username:jack
>>>>>>>> jill@xxxxxxxxxxx
>>>>>>>> username:jill
>>>>>>>> jim@xxxxxxxxxxx
>>>>>>>> username:jim
>>>>>>>>
>>>>>>>> now company 2 has three people as well in their company, widgets2:
>>>>>>>> John,
>>>>>>>> Joanie
>>>>>>>> jim
>>>>>>>>
>>>>>>>> they can set up john and joanie, but when they go to set up
>>>>>>>> jim, that
>>>>>>>> name is in use for another domain (widgets1)
>>>>>>>>
>>>>>>>> I can understand telling someone they cannot have the same nome as
>>>>>>>> someone else in THEIR domain, but how do you tell someone
>>>>>>>> they cannot
>>>>>>>> have the name jim@xxxxxxxxxxxxxxx because someone in another
>>>>>>>> domain on
>>>>>>>> the server already has the name Jim?
>>>>>>>>
>>>>>>>> Suppose you were an isp and had 100's of domains, what would you do?
>>>>>>>> I tried making the pop3 login name(this seems to be the one
>>>>>>>> that HAS to
>>>>>>>> be unique) the same as their email address, but it won't
>>>>>>>> accept the @
>>>>>>>> sign.
>>>>>>>>
>>>>>>>> sorry I'm so dense- I'm coming from a mail server that allowed me to
>>>>>>>> set up a user for domain1, and the same user for domain2 so I'm a
>>>>>>>> little stumped :)
>>>>>>>>
>>>>>>>> Thanks for the help!
>>>>>>>>
>>>>>>>> Jim
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, 19 Feb 2003 23:32:38 -0800, Eric Yang wrote:
>>>>>>>>> Jim,
>>>>>>>>>
>>>>>>>>> I think you are on the right track, and Ken's suggestion is
>>>>>>>>> even better.
>>>>>>>>> Simply, specify unique POP3 mailbox names and
>>>>>>>>> associate jim@xxxxxxx to the correct POP3 names, then you
>>>>>>>>> will be fine.
>>>>>>>>>
>>>>>>>>> regards,
>>>>>>>>> Eric
>>>>>>>>>
>>>>>>>>> On Wednesday, February 19, 2003, at 11:03 PM, Jim Sheffer wrote:
>>>>>>>>>
>>>>>>>>>> Ok, I'm getting ready to begin setting up the email addresses.
>>>>>>>>>>
>>>>>>>>>> Lets say I have 3 domains to keep it simple
>>>>>>>>>> I want jim@xxxxxxxxxxxxx to go to me
>>>>>>>>>> another Jim wants jim@xxxxxxxxxxxxxx to go to him
>>>>>>>>>>
>>>>>>>>>> How can I do this?
>>>>>>>>>>
>>>>>>>>>> If I use jim1 and jim2 (which means that when jim3 comes
>>>>>>>>>> along I have
>>>>>>>>>> to search ALL the accounts to see how many jim's there are)
>>>>>>>>>> then their
>>>>>>>>>> address shows as jim1 <jim1@xxxxxxxxxxxxx>
>>>>>>>>>>
>>>>>>>>>> or if I use jim%blueworld.com as the user name and
>>>>>>>>>> jim@xxxxxxxxxxxxx as
>>>>>>>>>> the email address, then the address looks like jim%blueworld.com
>>>>>>>>>> <jim%blueworld.com>
>>>>>>>>>>
>>>>>>>>>> what I need is for the address to look like
>>>>>>>>>> jim <jim@xxxxxxxxxxxxx>
>>>>>>>>>> jim <jim@xxxxxxxxxxxxxxxxx>
>>>>>>>>>>
>>>>>>>>>> Any ideas?
>>>>>>>>>>
>>>>>>>>>> Thanks all!
>>>>>>>>>>
>>>>>>>>>> Jim
>>>>>>>>>>
>>>>>>>>>> On Wed, 19 Feb 2003 10:59:06 -0800, Marc Kaiwi wrote:
>>>>>>>>>>> No, I have identical names with different domains but the pop
>>>>>>>>>>> account
>>>>>>>>>>> user must be different so you would have:
>>>>>>>>>>>
>>>>>>>>>>> User Jim1 = POP account: jim@xxxxxxxxxxxxx
>>>>>>>>>>> User Jim2 = POP account: jim@xxxxxxxxxxxxxxx
>>>>>>>>>>>
>>>>>>>>>>> Actually I use:
>>>>>>>>>>> User jim%blueworld.com = POP account: jim@xxxxxxxxxxxxx
>>>>>>>>>>> User jim%lassostudio.com = POP account: jim@xxxxxxxxxxxxxxx
>>>>>>>>>>>
>>>>>>>>>>> hope this helps...
>>>>>>>>>>>
>>>>>>>>>>> On Wednesday, February 19, 2003, at 10:52 AM, Jim Sheffer wrote:
>>>>>>>>>>>
>>>>>>>>>>>> We are getting ready to impliment post.Office as our new list
>>>>>>>>>>>> and email
>>>>>>>>>>>> server.
>>>>>>>>>>>> I just read this somewhere and was hoping it isn't true...
>>>>>>>>>>>> "Post.Office can support multiple domains, but user names
>>>>>>>>>>>> must be
>>>>>>>>>>>> unique across the domains in order for this feature to work
>>>>>>>>>>>> properly "
>>>>>>>>>>>>
>>>>>>>>>>>> Does this mean I cannot have jim@xxxxxxxxxxxxx &
>>>>>>>>>>>> jim@xxxxxxxxxxxxxxx ?
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks
>>>>>>>>>>>>
>>>>>>>>>>>> Jim
>>>>>>>>>>>>
>>>>>>>>>>>> -----------------------------------------
>>>>>>>>>>>> Jim Sheffer Blue World Communications
>>>>>>>>>>>> Systems Administrator phone 425.646.0288 ext. 213
>>>>>>>>>>>> -----------------------------------------
>>>>>>>>>>>> ---------
>>>>>>>>>>>> Tenon Intersystems' Post.Office Mailing List
>>>>>>>>>>>> To unsubscribe: send mailto:post_office-request@xxxxxxxxxxxxxxx
>>>>>>>>>>>> with the body only containing:
>>>>>>>>>>>> unsubscribe
>>>>>>>>>>>> Find the searchable mailing list archives at:
>>>>>>>>>>>> http://postoffice.computeroil.com/
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>> Signed: Marc Kaiwi
>>>>>>>>>>>
>>>>>>>>>>> ---------
>>>>>>>>>>> Tenon Intersystems' Post.Office Mailing List
>>>>>>>>>>> To unsubscribe: send mailto:post_office-request@xxxxxxxxxxxxxxx
>>>>>>>>>>> with the body only containing: unsubscribe
>>>>>>>>>>> Find the searchable mailing list archives at:
>>>>>>>>>>> http://postoffice.computeroil.com/
>>>>>>>>>> ---------
>>>>>>>>>> Tenon Intersystems' Post.Office Mailing List
>>>>>>>>>> To unsubscribe: send mailto:post_office-request@xxxxxxxxxxxxxxx
>>>>>>>>>> with the body only containing:
>>>>>>>>>> unsubscribe
>>>>>>>>>> Find the searchable mailing list archives at:
>>>>>>>>>> http://postoffice.computeroil.com/
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>> -------------------------------------------------------------
>>>>>>>>> ---------
>>>>>>>>> ----------------------------
>>>>>>>>> Eric Yang Senior Software Engineer
>>>>>>>>> Tenon Intersystems
>>>>>>>> eyang@xxxxxxxxx
>>>>>>>>> 1123 Chapala Street
>>>>>>>>> 805-963-
>>>>> 6983
>>>>>>>>> Santa Barbara, CA 93101
>>>>>>>>> http://www.tenon.com
>>>>>>>>> -------------------------------------------------------------
>>>>>>>>> ---------
>>>>>>>>> ----------------------------
>>>>>>>> ---------
>>>>>>>> Tenon Intersystems' Post.Office Mailing List
>>>>>>>> To unsubscribe: send mailto:post_office-request@xxxxxxxxxxxxxxx
>>>>>>>> with the body only containing:
>>>>>>>> unsubscribe
>>>>>>>> Find the searchable mailing list archives at:
>>>>>>>> http://postoffice.computeroil.com/
>>>>>>>>
>>>>>>>>
>>>>>>> ---------------------------------------------------------------
>>>>>>> -------
>>>>>>> ----------------------------
>>>>>>> Eric Yang Senior Software Engineer
>>>>>>> Tenon Intersystems
>>>>>> eyang@xxxxxxxxx
>>>>>>> 1123 Chapala Street
>>>>>>> 805-963-
>>> 6983
>>>>>>> Santa Barbara, CA 93101
>>>>>>> http://www.tenon.com
>>>>>>> ---------------------------------------------------------------
>>>>>>> -------
>>>>>>> ----------------------------
>>>>>> ---------
>>>>>> Tenon Intersystems' Post.Office Mailing List
>>>>>> To unsubscribe: send mailto:post_office-request@xxxxxxxxxxxxxxx
>>>>>> with the body only containing:
>>>>>> unsubscribe
>>>>>> Find the searchable mailing list archives at:
>>>>>> http://postoffice.computeroil.com/
>>>>> ---------
>>>>> Tenon Intersystems' Post.Office Mailing List
>>>>> To unsubscribe: send mailto:post_office-request@xxxxxxxxxxxxxxx
>>>>> with the body only containing:
>>>>> unsubscribe
>>>>> Find the searchable mailing list archives at:
>>>>> http://postoffice.computeroil.com/
>>>>>
>>>>>
>>>> ----------------------------------------------------------------------
>>>> ----------------------------
>>>> Eric Yang Senior Software Engineer
>>>> Tenon Intersystems
>>> eyang@xxxxxxxxx
>>>> 1123 Chapala Street
>>>> 805-963-6983
>>>> Santa Barbara, CA 93101
>>>> http://www.tenon.com
>>>> ----------------------------------------------------------------------
>>>> ----------------------------
>>> ---------
>>> Tenon Intersystems' Post.Office Mailing List
>>> To unsubscribe: send mailto:post_office-request@xxxxxxxxxxxxxxx
>>> with the body only containing:
>>> unsubscribe
>>> Find the searchable mailing list archives at:
>>> http://postoffice.computeroil.com/
>
> ---------
> Tenon Intersystems' Post.Office Mailing List
> To unsubscribe: send mailto:post_office-request@xxxxxxxxxxxxxxx
> with the body only containing:
> unsubscribe
> Find the searchable mailing list archives at:
> http://postoffice.computeroil.com/
---------
Tenon Intersystems' Post.Office Mailing List
To unsubscribe: send mailto:post_office-request@xxxxxxxxxxxxxxx
with the body only containing:
unsubscribe
Find the searchable mailing list archives at:
http://postoffice.computeroil.com/
|
