Re: Type 2 Errors...

What is the last thing (software or hardware wise) you have done with the 
machine before it started to exhibit these problems? It is more than likely a 
RAM issue. Try pulling and reseating the RAM or remove one DIMM at a time and 
see if anything changes. I assume that with the RAM you have, it is (3) 128MB 
DIMMs-pulling one at a time should not affect performance drastically. What I 
have found in my years of experience is that if you cant explain certain 
strange behavior or random errors, RAM is a good place to start. Good luck.

On Friday, December 15, 2000 1:33 PM, Doug Hardman <doug@xxxxxxxxxxxxxxx> wrote:
>I've got a real pickle here. I've got a machine that has been (for the most
>part) solid for almost 2 years now, and it's been a pain in the a$$ the last
>2 months. It's "Unexpectedly Quitting" with a "Type 2" error 2-3 times a
>week. I've got a Power Key Pro 200 attached with the tickle plug-in running,
>but that doesn't even work. (I've tested Sophisticated Circuit's new plug-in
>as well...it WILL work if the app hangs, but not the type 2)
>
>Here's the rundown...
>
>WebTen 2.1.10
>WebCatalog 3.0
>B&W G3/300
>384MB Ram
>Virtual Off (same with it on)
>
>Any suggestions???
>
>    -Doug
>
>
>-- 
>Douglas Hardman
>doug@xxxxxxxxxxxxxxx
>Silver Creek, Ltd.
>
>----
>Tenon Intersystems' WebTen Mailing List
>To unsubscribe: send mail to webten-request@xxxxxxxxx 
>with the subject: unsubscribe
>Find searchable Mailing List archives at
>http://listsearch.blueworld.com/webtensearch.lasso
>

----
Tenon Intersystems' WebTen Mailing List
To unsubscribe: send mail to webten-request@xxxxxxxxx
with the subject: unsubscribe
Find searchable Mailing List archives at
http://listsearch.blueworld.com/webtensearch.lasso