Re: Type 2 Errors...

I've got 1-256M and 1-128M installed. I just moved them to different seats,
and we'll see what happens...


WebTen has 32M(min)/175M(pre) allocated. I've tried moving these around...no
avail.

I've also ran Norton DD&SD.

Hope I can make it through this weekend.

    -Doug


-- 
Douglas Hardman
doug@xxxxxxxxxxxxxxx
Silver Creek, Ltd.


On 12/15/00 2:17 PM, "Fred Parker" <fred@xxxxxxxxxxxxxx> wrote:

> What is the last thing (software or hardware wise) you have done with the
> machine before it started to exhibit these problems? It is more than likely a
> RAM issue. Try pulling and reseating the RAM or remove one DIMM at a time and
> see if anything changes. I assume that with the RAM you have, it is (3) 128MB
> DIMMs-pulling one at a time should not affect performance drastically. What I
> have found in my years of experience is that if you cant explain certain
> strange behavior or random errors, RAM is a good place to start. Good luck.
> 
> On Friday, December 15, 2000 1:33 PM, Doug Hardman <doug@xxxxxxxxxxxxxxx>
> wrote:
>> I've got a real pickle here. I've got a machine that has been (for the most
>> part) solid for almost 2 years now, and it's been a pain in the a$$ the last
>> 2 months. It's "Unexpectedly Quitting" with a "Type 2" error 2-3 times a
>> week. I've got a Power Key Pro 200 attached with the tickle plug-in running,
>> but that doesn't even work. (I've tested Sophisticated Circuit's new plug-in
>> as well...it WILL work if the app hangs, but not the type 2)
>> 
>> Here's the rundown...
>> 
>> WebTen 2.1.10
>> WebCatalog 3.0
>> B&W G3/300
>> 384MB Ram
>> Virtual Off (same with it on)
>> 
>> Any suggestions???
>> 
>>    -Doug
>> 
>> 
>> -- 
>> Douglas Hardman
>> doug@xxxxxxxxxxxxxxx
>> Silver Creek, Ltd.

----
Tenon Intersystems' WebTen Mailing List
To unsubscribe: send mail to webten-request@xxxxxxxxx
with the subject: unsubscribe
Find searchable Mailing List archives at
http://listsearch.blueworld.com/webtensearch.lasso