Re: Server Port Change

I had to change the webserving port from 80 to 85 and did so within webten
admin. However after restarting I can not access the webten_admin page. I
get the first prompt to enter name and pasword but then it tells me that
port :84 is busy try again later or stalls out one or the other.

Any hints?

Ummm, I suspect that you have Squid turned on, and it usually operates on port 80 and bumps Apache to port 81. Since you have manually reassigned Apache to port 85, my guess is that Squid is now responding on that port minus 1, which would put it on port 84 resulting in the conflict.

Check your cache settings - turn off accelerator cache and let us know what happens.

Since you can't access the admin page at this point, that's going to be a bit tricky, you will have to open the httpd.conf file and see what ports the "listen" directive shows. and what ports the virtual hosts show.

If you need assistance with this, give a call, or email me off-list.
--
    Stephanie J. Wright

---------------------------------------------------------------------
Tenon Intersystems                                       805-963-6983
1123 Chapala Street                                 swright@xxxxxxxxx
Santa Barbara, CA 93101                          http://www.tenon.com
---------------------------------------------------------------------

---------                    ----------
Tenon Intersystems' webten Mailing List
To unsubscribe: send mailto://webten-request@xxxxxxxxxxxxxxx
with the body: unsubscribe
Find searchable Mailing List archives at:
http://listsearch.blueworld.com/webtensearch.lasso