On 4/25/02 at 3:46 PM, james.tech.lists@xxxxxxxxxxxxxxxxxxxxx (James Harvard)
wrote:
> Are you sure that it's really conflicting with the PCI card? In my case it
> appeared not to be working, but actually the Tenon stack was working, but not
on
> the physical interface that I expected - see the archived message I gave a
link
> to for more details.
>
> FWIW, I was using an Asanté card, and it worked fine (once I worked out what
> stack was using what interface!).
>
> James Harvard
All I know is that I did dozen of config, to get it moving,
and when I was trying to do the 3 IP or 2 IP method, it still would
not connect, even pinging, was not bring anything back.
leaving it on the built-in it work fine. and the apple on the pci no-problems,
I wanted to switch them, have the apple use, built-in, and tenon stack, use
pci, ( pci is 10/100 )
No, that did not work, so, they ( Eric, ) and I hand coded, the rc.WebTen file,
ie0 to ie1
well then it work, using dual stack on one card.
BUT !!!!, there is a problem after all on this,
apple date and time doesn't work, for auto update.
and browser will not work on this machine
and EIMS, will not work, either, all when WebTen is running,
So, it has to be that Tenon Stack, MUST be on its own Card, by its self.
Then all should work as normal.
the question comes in which? card, works with Tenon Stack.
There are no Doc's on this, at all. Hit or Miss.
Richard
CMS
|
