Re: Fwd: Re: >>> Secure Admin?

["Tenon Support" <support@xxxxxxxxxxxxxx>]

Hazlitt,

remember,

If you enable SSL for a virtual host, you will need to also and a 
non-SSL virtual host with the same name if you want to access it both 
ways.

TTS
--Eric


> Addendum: Last night, right after I followed the process below and 
> sent that message to the list, I quit and relaunched IE and tried to 
> get back to the web admin, http://www.zada.com/itools_admin and 
> could no longer gain access, getting the 'attempt to load failed' 
> dialog. I also noticed that the web site http://www.zada.com/ is now 
> redirecting to another virtual domain on that server. All other 
> virtual domains are accessible. I'm going to drive over soon to turn 
> off the SSL to see if that fixes it. Any insights as to what is 
> going on would be helpful. :: Hazlitt
>
> At 20:46 -0800 2002-02-27, Hazlitt Krog wrote:
> > I can not seem to get this to work. I have a system with a clean 
> > install of OS X S 10.1.3 with iTools 6.5.1.
> >
> > I created an iTools-generated temporary certificate. In the 
> > certificate I used the host name and domain name entered into 
> > iTools' "Configure Server Hostname" dialog, in my case "www" and 
> > "zada.com" i.e., "www.zada.com"  Then I toggled SSL Security "On" 
> > in the Virtual Host Configuration table and saved the 
> > configuration. I know SSL is now available for the domain because 
> > in the Virtual Host Configuration table it now says "www.zada.com 
> > SSL" with "SSL" in red.
> >
> > I tried going to https://www.zada.com:85 and it churned for a few 
> > minutes before displaying a dialog that says "A connection failure 
> > has occurred."
> >
> > Alternately, I try going to https://www.zada.com/itools_admin and 
> > it displays a dialog that says there's a problem with the 
> > certificate (this alert was expected, since I'm using a temporary 
> > certificate), then it displays the first password dialog. I input 
> > the user name and password and then churns for a few minutes before 
> > displaying a dialog that says "The attempt to load 'Accessing URL 
> > https://www.zada.com/itools_admin' failed."
> >
> > I have no trouble connecting remotely via the non-secure 
> > http://www.zada.com/itools_admin
> >
> > How do I get the secure admin connection to work?