Re: QTSS4 on port 80 with iTools

Brice,
I will look at the archives and see what is going on .. ;)

All you ned to do is set up the machine with 2 IP addresses, tell Apache to
listen on one only .. There is a setting in the httpd.conf file for this.

Then point the other DNs at the QTSS IP .. Ie

Www.domain.com points to xxx.xxx.xxx.1 Apache port 80
Stream.domain.com points to xxx.xxx.xxx.2 QTSS port 80

Setting up another Ip address in OSX as as easy as below ..

Go to the network settings,
Click the Show dropdown then 'active network ports'
Click new and call it 'QTSS'
Select the 'built in interface' to use the existing card
Then set up the settings manually as if it was just another Network card.
Use the 'other' IP address for this .. Don't allocate the same Ip ;)

These only started to work properly in 10.1.2 ..

Hope that helps .. 
Alain

> Alain Russell wrote:
> 
>>> 1) trying to create a user with FTP access to the
>>>  'All Website directory' or to a Virtual Host
>>>  display this error:
>>>> Failed populating '/Library/WebServer/WebSites' for FTP access
>>>> Error:256 Probably a permissions or directory path problem.
> 
>> This is normally a permissions error as the installer wants to add
>> usr/library & system directories. Try this to fix ..
> 
> 
> Reinstalling iTools solved my problem, but one question remains:
> Why did that problem appear as I installed NO "non-tenon" pkg
> after iTools 6.5.1 (only php, mysql, webmail)?
> 
>>> 2) Anybody has experience running QTSS4 on port 80 with iTools?
>>>  How can I force QTSS4 to use another IP adress than the main one
>>>  (in use for iTools, admin and virtual hosts) ?
>> 
>> There is something in the archives about this ..
>> http://itools.blackpepper.co.nz search for 'qtss port 80' and choose all
>> words .. This will give you all the results..
> 
> 
> After searching the 1805 msg that this query bring, is my conclusion:
> 
> Those archives have a little problem ;-)
> 
> Clicking on the title of a mail in the list display another msg
>  ex. search 'qtss port 80' and click the first link :
>  Re: Adding extra ip addresses  31/12/2000   Blake Garner
> <trode@xxxxxxxxxxxxx>
>  you will get this message:
> 31/12/2000   Jack Miller   Re: iTools FREE Updates Available Now
> 
> Even with this small problem of usability, the most recent message
> state that they are still expecting an answer from Tenon 2 years ago ;-)
> 
>> As far as I know you cant server websites on port 80 and stream QTSS on that
>> port as well .. They need to be on separate IP addresses .. Osx 10.1.2 fixed
>> a lot of problems with multihoming IP addresses so all should be good ??
> 
> 
> Maybe I should reformulate my question this way:
> 
> 
> "How can I setup QTSS4 to use another IP address (for streaming on port
> 80 purpose) than the main IP address of the computer (as displayed in
> the "Network" Control Panel), as this IP address is automatically
> 'requested' by iTools upon install ?"
> 
> If anybody manage to do this since the last 2 years,
> please let me know...
> 
> <brice/>
> --
> Brice Le Blevennec, Digerati, ListDad, <http://www.brice.net>
> Emakina S.A. - The e-business Agency <http://www.emakina.com>
> Ex Machina Television S.P.R.L.- Television & Radio Production
> <http://www.cybercafe21.net> <http://www.netbusinessnews.com>
> Contact Office Group S.A.  -  The Professional  Online Office
> <http://www.contactoffice.com>
>