|
Search tenon.com
Thanks to:
|
|
iTools
on 2/22/02 11:09 AM, iTools List at itools@xxxxxxxxxxxxxx wrote:
> Steve,
>
> Go for it. You won't be disappointed. We use iTools 6 on OSX (client) and
> it runs and runs without any issues. Make sure you have at least 256mb of
> RAM and more if the machine can handle it. We use 1-2 gbs of RAM in all our
> servers.
>
> Not sure if you're running your mail server on the same box as WebStar, but
> you should (most likely will have too) consider separating the two. Under
> iTools you will be running Apache. If you are running a mail server such as
> EIMS you will not be able to run the two on the same server.
>
> Other than that, you shouldn't have any issues at all. Just clean, trouble
> free serving. Can't say enough about the folks at Tenon. They have
> probably the best support I've ever seen.
>
> Regards,
>
> Greg Scott
> WEBUILDERS
>
Thanks for the input. I'm am currently using an iMac 350/OS 9.1/768MB
ram/60gb drive. I'm running webstar's www/mail/ftp on this iMac. Don't have
a budget for another machine to set up. Is this going to be a problem in
your opinion?
And also, if I'm understanding everyone correctly, I don't need OSXServer to
serve using itools. Correct?
--
Steve Vaught
svaught@xxxxxxxxxxxxxxxxxxx
http://www.highresolutions.com
http://www.highresprinting.com
High Resolutions, Inc.
125 West Jackson Avenue
Knoxville, TN 37902
ph. 865.523.3361
fx. 865.523.3763
-God Bless America!
|
| <Prev in Thread] |
Current Thread |
[Next in Thread>
|
- New to iTools/OSX, Steve Vaught
- Re: New to iTools/OSX, Bob Minor
- Re: New to iTools/OSX, iTools List
- Re: New to iTools/OSX,
Steve Vaught <=
- Re: New to iTools/OSX, Bob Minor
- Re: New to iTools/OSX, iTools List
- Re: New to iTools/OSX, Steve Vaught
- Re: New to iTools/OSX, Kurt Tappe
- Re: New to iTools/OSX, Mike Schienle
- FTP users permission problem and QTSS4 on port 80, Brice Le Blevennec
- Re: FTP users permission problem and QTSS4 on port 80, Alain Russell
- Reply-To error in list .., Alain Russell
- QTSS4 on port 80 with iTools, Brice Le Blevennec
- Re: QTSS4 on port 80 with iTools, Alain Russell
|
| Tenon Home |
Products |
Order |
Contact Us |
About Tenon |
Register |
Tech Support |
Resources |
Press Room |
Mailing Lists |
|
Copyright©2003 Tenon Intersystems, 232 Anacapa Street, Suite 2A, Santa Barbara,
CA 93101. All rights reserved.
Questions about our website - Contact:
webmaster@tenon.com.
|
|