Tenon Intersystems Please see text links at bottom of page for navigation
Please see text links at bottom of page for navigation

Search tenon.com

Thanks to:

iTools

Re: Important iTools 6.5 and Jaguar Information

To: itools@xxxxxxxxxxxxxxx
Subject: Re: Important iTools 6.5 and Jaguar Information
From: Terry Allen <hmag@xxxxxxxxxxxxxx>
Date: Tue, 27 Aug 2002 19:13:47 +1000
>Hi,
>
>Here is the long-awaited post from us here at Tenon regarding iTools 6.5
>and Jaguar.  I really wanted to post this information after we had all of
>the answers and our updates completed, but, since you all are so eager, we
>really can't wait anymore.  :)
>
>
>AT THIS MOMENT, HERE IS WHAT WORKS AND WHAT DOESN'T:
>
>What works:
>-----------
>
>1. The iTools 6.5.5 Core Package
>
>Although the iTools core package should work properly, a number of you
>have reported installer issues.  I have experienced these issues in
>certain circumstances.  I've experienced a great deal of success in first
>replacing the installer.sh script with a working one and re-installing.
>
>2. Virtually all of the optional and third-party packages.
>
Hi again,
        Thanks for that Erik - your advice at this time would appear to be
'wait until we have iTools fully compatible - this is fine by me - however,
a couple of questions.
        At least one person I know, has run the update on their iTools
machine & 10.2 wiped out their httpd.conf file & who know what else, with
sendmail config apparently again being an issue.
        I realise you guys are still working on this, but can you let us
all know if the following will happen when we go to 10.2

1. 10.2 install (hopefuly without problems) as an update to 10.1.5, NOT a
fresh install
2. iTools 6.5.6 (or whatever the then current version is) installed to the
existing 6.5.4 installation
3. iTools saves existing 6.5.4 configuration, including sendmail
configuration, apache config, iTool settings, users & groups as well as the
various htdig, PHP & MySQL settings.

        Will this happen or is Tenon writing some sort of backup utility
that we can run prior to installing 10.2?
        Of particular concern to me is that I have a great iTools internal
sendmail setup, with autoreplies, that might be ruined by the 10.2 install.


        Bye for now, Terry Allen
        ___________________________________________________________________
hEARd

Postal Address:
        hEARd
        c/o 128 The Entrance Rd
        The Entrance
        NSW    2261
        Australia

Internet -
        WWW:
        http://heard.com.au or http://www.ozemail.com.au/~hmag
        http://hosting.heard.com.au

Interactive Message Board - http://heard.com.au/wwwboard/

EMAIL: (checked every Thursday & Sunday, sometimes more often)
hmag@xxxxxxxxxxxxxx

-----------------------------------------------
Non profit promotion for new music - since 1994
-----------------------------------------------
Also, check out the Educate site - http://www.educate.net.au


---------                                
---------
Tenon Intersystems' iTools Mailing List
To unsubscribe:  send 
mailto://itools-request@xxxxxxxxxxxxxxx
with the subject: unsubscribe
Find searchable mailin list archives at:
http://itools.blackpepper.co.

<Prev in Thread] Current Thread [Next in Thread>

| Tenon Home | Products | Order | Contact Us | About Tenon | Register | Tech Support | Resources | Press Room | Mailing Lists |

Powered By iTools

Copyright©2003 Tenon Intersystems, 232 Anacapa Street, Suite 2A, Santa Barbara, CA 93101. All rights reserved.
Questions about our website - Contact: webmaster@tenon.com.


Tenon Home  Tenon Home  Tenon Home  Tenon Home Product Info  Tenon Ordering Contact About Register Support Resources Press Mailing Lists