|
Search tenon.com
Thanks to:
|
|
iTools
Hi Terry,
10.2 can upgrade over 10.1.5, but there will be certain changes
to your existing configuration. You can choose the option in
Apple Installer to archive your existing system, if you are unsure
about the upgrade. It will also take a very long period
of time to finish the upgrading process.
10.2 Server will support Quota from the System Manager UI, but 10.2 Desktop
does not support Quota on any UI tools. I tried to enable quota
on a 10.2 Desktop, but the included utilities did nothing.
10.2 will disconnect iTools 6.x from working. All of the settings should be
preserved but you will need to install iTools 6.5.5 to bring iTools
functionalities
back.
Just wait until 10.2 is arrived and upgrade to iTools 6.5.5 after
10.2 is installed.
regards,
Eric
Hi again,
Cool, that's pretty much what I wanted to know. A real shame
about the quotas, but I guess there are ways around it. I suppose the
problem may well be to do with HFS+ as opposed to UFS - disk quotas
are supposed to work under UFS.
Obviously, the best thing is to have a mirrored backup in
case something goes haywire.
2 things from your reply - you mention that the update takes
'a long time' to 10.2 - what kind of timeframe are we talking?
The other thing - you mentioned a couple of things with the
update, 'certain changes in your configuration' & 'iTools settings
should be preserved'. What changes will we be looking at in terms of
the configuration of the system & are you saying that there are no
changes to the iTools settings - a simple reinstall of the iTools
package will suffice? That's great news if it turns out to be true.
Bye for now, Terry Allen
___________________________________________________________________
hEARd
Postal Address:
hEARd
c/o 128 The Entrance Rd
The Entrance
NSW 2261
Australia
Internet -
WWW:
http://heard.com.au or http://www.ozemail.com.au/~hmag
http://hosting.heard.com.au
Interactive Message Board - http://heard.com.au/wwwboard/
EMAIL: (checked every Thursday & Sunday, sometimes more often)
hmag@xxxxxxxxxxxxxx
-----------------------------------------------
Non profit promotion for new music - since 1994
-----------------------------------------------
Also, check out the Educate site - http://www.educate.net.au
--------- --------- Tenon
Intersystems' iTools Mailing List To unsubscribe: send
mailto://itools-request@xxxxxxxxxxxxxxx with the subject: unsubscribe
Find searchable mailin list archives at: http://itools.blackpepper.co.
|
| <Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Re: Xserve installs (Was: Re: Dumping OSXS for OSX - Clean Install?), (continued)
Re: Dumping OSXS for OSX - Clean Install?, Erik Lotspeich
- Re: Dumping OSXS for OSX - Clean Install?, Syd Chesson
- Re: Dumping OSXS for OSX - Clean Install?, Alain Russell
- Re: Dumping OSXS for OSX - Clean Install?, Erik Lotspeich
- 10.2 questions, Terry Allen
- Re: 10.2 questions, Eric Yang
- Re: 10.2 questions,
Terry Allen <=
- what error is this????, Joseph D'Andrea
- RE: what error is this????, Cris
- PM is shutting down, Ole Stakemann
- Re: what error is this????, Eric Yang
- Re: what error is this????, Alain Russell
Re: 10.2 questions, Eric Yang
Re: 10.2 questions, Alain Russell
Re: 10.2 questions, Terry Allen
Re: 10.2 questions, Bob Minor
Re: 10.2 questions, Bob Minor
|
| Tenon Home |
Products |
Order |
Contact Us |
About Tenon |
Register |
Tech Support |
Resources |
Press Room |
Mailing Lists |
|
Copyright©2003 Tenon Intersystems, 232 Anacapa Street, Suite 2A, Santa Barbara,
CA 93101. All rights reserved.
Questions about our website - Contact:
webmaster@tenon.com.
|
|