|
Search tenon.com
Thanks to:
|
|
iTools
Re: itools 7 install over itools 6.5.7
Hi!
And only the old data directories from mysql into the new mysql directory,
thats it, is that all that is do do, or there other config files they are
also to copy für phpmyadmin?
By
Peter
am 10.05.2003 9:05 Uhr schrieb Terry Allen unter hmag@xxxxxxxxxxxxxx:
>> Hello!
>>
>> I will do that, i have many mysql databases, if i backup that, and make a
>> new installation on from the ground, all is ok. Then i data directories from
>> mysql into the new mysql databases, is that all that is do do, or there
>> other config files they are also to copy für phpmyadmin?
>> And can i use the new itools7 mysl 4? On the old system was running MySQL
>> 3.23.52
>>
> Hi again,
> Yes, I would recommend using the newest MySQL, as the old one
> may have problems with iTools 7. Same with any of the other packcages
> such as PHP, POP/IMAP & Htdig too I would guess.
> --
>
> Bye for now, Terry Allen
> ___________________________________________________________________
> hEARd
>
> Postal Address:
> hEARd, 26B Glenning Rd, Glenning Valley, NSW 2261, Australia
> Internet -
> WWW:
> http://heard.com.au or http://www.ozemail.com.au/~hmag
> http://hosting.heard.com.au - http://itavservices.com
> Interactive Message Board - http://heard.com.au/wwwboard/
> EMAIL: (checked every Thursday & Sunday, sometimes more often)
> hmag@xxxxxxxxxxxxxx
> Phone: Australia - 02 4388 1400 / International - + 61 2 43881400
> Mobile: Australia - 04 28881400 / International - 61 4 28881400
> -----------------------------------------------
> Non profit promotion for new music - since 1994
> -----------------------------------------------
> ---------
> Tenon Intersystems' iTools Mailing List
> To unsubscribe: send mail to
> itools-request@xxxxxxxxxxxxxxx
> with the body only containing:
> unsubscribe
> Find the searchable mailing list archives
> at:
> http://itools.blackpepper.co.nz/
---------
Tenon Intersystems' iTools Mailing List
To unsubscribe: send mail to
itools-request@xxxxxxxxxxxxxxx
with the body only containing:
unsubscribe
Find the searchable mailing list archives
at:
http://itools.blackpepper.co.nz/
|
| <Prev in Thread] |
Current Thread |
[Next in Thread>
|
Re: itools 7 install over itools 6.5.7, Terry Allen
- Re: itools 7 install over itools 6.5.7, peter polz
- Re: itools 7 install over itools 6.5.7, peter polz
- Re: itools 7 install over itools 6.5.7, Terry Allen
- Re: itools 7 install over itools 6.5.7,
peter polz <=
- Re: itools 7 install over itools 6.5.7, Terry Allen
- Re: itools 7 install over itools 6.5.7, Erich Parzefall
- Re: itools 7 install over itools 6.5.7, peter polz
- Re: itools 7 install over itools 6.5.7, Erich Parzefall
- Re: itools 7 install over itools 6.5.7, peter polz
- Re: itools 7 install over itools 6.5.7, Erich Parzefall
- Re: itools 7 install over itools 6.5.7, Blaine Fergerstrom
- Re: itools 7 install over itools 6.5.7, peter polz
- Re: itools 7 install over itools 6.5.7, Blaine Fergerstrom
- Re: itools 7 install over itools 6.5.7, peter polz
|
| Tenon Home |
Products |
Order |
Contact Us |
About Tenon |
Register |
Tech Support |
Resources |
Press Room |
Mailing Lists |
|
Copyright©2003 Tenon Intersystems, 232 Anacapa Street, Suite 2A, Santa Barbara,
CA 93101. All rights reserved.
Questions about our website - Contact:
webmaster@tenon.com.
|
|