|
Search tenon.com
Thanks to:
|
|
iTools
Re: itools 7 install over itools 6.5.7
Hello!
I will do that, i have many mysql databases, if i backup that, and make a
new installation on from the ground, all is ok. Then i data directories from
mysql into the new mysql databases, is that all that is do do, or there
other config files they are also to copy für phpmyadmin?
And can i use the new itools7 mysl 4? On the old system was running MySQL
3.23.52
Hi again,
Yes, I would recommend using the newest MySQL, as the old one
may have problems with iTools 7. Same with any of the other packcages
such as PHP, POP/IMAP & Htdig too I would guess.
--
Bye for now, Terry Allen
___________________________________________________________________
hEARd
Postal Address:
hEARd, 26B Glenning Rd, Glenning Valley, NSW 2261, Australia
Internet -
WWW:
http://heard.com.au or http://www.ozemail.com.au/~hmag
http://hosting.heard.com.au - http://itavservices.com
Interactive Message Board - http://heard.com.au/wwwboard/
EMAIL: (checked every Thursday & Sunday, sometimes more often)
hmag@xxxxxxxxxxxxxx
Phone: Australia - 02 4388 1400 / International - + 61 2 43881400
Mobile: Australia - 04 28881400 / International - 61 4 28881400
-----------------------------------------------
Non profit promotion for new music - since 1994
-----------------------------------------------
---------
Tenon Intersystems' iTools Mailing List
To unsubscribe: send mail to
itools-request@xxxxxxxxxxxxxxx
with the body only containing:
unsubscribe
Find the searchable mailing list archives
at:
http://itools.blackpepper.co.nz/
|
| <Prev in Thread] |
Current Thread |
[Next in Thread>
|
Re: itools 7 install over itools 6.5.7, Terry Allen
- Re: itools 7 install over itools 6.5.7, peter polz
- Re: itools 7 install over itools 6.5.7, peter polz
- Re: itools 7 install over itools 6.5.7,
Terry Allen <=
- Re: itools 7 install over itools 6.5.7, peter polz
- Re: itools 7 install over itools 6.5.7, Terry Allen
- Re: itools 7 install over itools 6.5.7, Erich Parzefall
- Re: itools 7 install over itools 6.5.7, peter polz
- Re: itools 7 install over itools 6.5.7, Erich Parzefall
- Re: itools 7 install over itools 6.5.7, peter polz
- Re: itools 7 install over itools 6.5.7, Erich Parzefall
- Re: itools 7 install over itools 6.5.7, Blaine Fergerstrom
- Re: itools 7 install over itools 6.5.7, peter polz
- Re: itools 7 install over itools 6.5.7, Blaine Fergerstrom
|
| Tenon Home |
Products |
Order |
Contact Us |
About Tenon |
Register |
Tech Support |
Resources |
Press Room |
Mailing Lists |
|
Copyright©2003 Tenon Intersystems, 232 Anacapa Street, Suite 2A, Santa Barbara,
CA 93101. All rights reserved.
Questions about our website - Contact:
webmaster@tenon.com.
|
|