Re: iTools 7.1 on VersionTracker

1.3 is up!
Thanks.

Now next

MySQL4. Won't start either (upgraded with the Tenon pkg after update to 7.1) Seems the previous v3 is still running.... Manual start: 030730 9:36:47 Can't start server: Bind on TCP/IP port: Address already in use 030730 9:36:47 Do you already have another mysqld server running on port: 3306 ? 030730 9:36:47 Aborting

phpMyAdmin path doesn't exist.
The alias in VH config wasn't there... Fixed that

3 alias entries in default VH (icon - Manual - cgi-bin)
no alias at all in other VH's.

Directory Index field was empty for all VH's.

patrick@xxxxxxxxxx

At 16:12 -0700 29-07-2003, Eric Yang wrote:

Please comment out these two lines in /etc/httpd/httpd.conf:
#LoadModule apple_hfs_module /usr/libexec/httpd/mod_hfs_apple.so
#AddModule mod_hfs_apple.c
In a normal case, this should have worked, unfortunately, it seems like there is a bad binary on your system. /usr/libexec/httpd/mod_hfs_apple.so is defected. I would recommend to check system update to make sure Mac OS X Server is up to date on your system.
regard,
Eric
On Tuesday, July 29, 2003, at 02:27 PM, Patrick Sneyers wrote:
Eric,
6.5 was never on this machine (xserve 10.2.6).
file /usr/libexec/httpd/mod_hfs_apple.so is there
There were OSXServer updates AFTER Itools7 Instal.
7.1 update was done through the web GUI (remotely, LAN, Safari)
No luck...

patrick@xxxxxxxxxx

At 09:30 -0700 29-07-2003, Eric Yang wrote:

Hi Patrick,

Did you have iTools 6.5 installed? There is a corner case that if iTools 6.5 was installed on the system before. You need to make sure that you had run iTools 6.5 installer to keep your Apache 1.3 in working condition. It is possible that if you moved from iTools 6.5 to 7.0, and then there were Mac OS Xsystem updates. This would break the existing Apache 1.3 on your system. Reinstall iTools 6.5 then iTools 7.1 would fix this problem.

In addition, you will always need to run iTools 6.5 installer and iTools 7.1 installer together when there is new Mac OS X system update.

If you never have iTools 6.5 installed, make sure you have /usr/libexec/httpd/mod_hfs_apple.so exist on your system. Hope this helps.

regards,

Eric

On Tuesday, July 29, 2003, at 03:11 AM, Patrick Sneyers wrote:

Suddenly it was there!

Updated, is now 7.1

Switched to apache 1.3

Won't start...

Restarting Apache Web Server /Library/Tenon/WebServer/Executables/apachectl stop: httpd (no pid file) not running /Library/Tenon/WebServer/Executables/apachectl startssl: httpd could not be started

Tried manual, error below

dyld: /usr/sbin/httpd Undefined symbols:

_apple_hfs_module

/usr/sbin/apachectl: line 212: 17492 Trace/BPT trap $HTTPD

Back to Apache 2, no problem

Were to start for troubleshooting?

patrick@xxxxxxxxxx

At 10:47 +0200 29-07-2003, Patrick Sneyers wrote:

My update pane says: "your system is up to date"...

patrick@xxxxxxxxxx

At 22:02 -1000 28-07-2003, Blaine Fergerstrom wrote:

>iTools v7.1

>

>Release date: 2003-07-28

>

>http://www.versiontracker.com/dyn/moreinfo/macosx/2239

>

>What's new in this version:

><<snip>>Existing Apache settings are now imported

>automatically. iTools 7 customers can upgrade to this version using the

>embedded system update service.<<snip>>

>--

>Blaine Fergerstrom | ZZ-Type | zztype@xxxxxxxxxxxxx

>http://www.zztype.com | http://alohatown.com

>Kamehameha Schools | blferger@xxxxxxxx | http://oahu.ksbe.edu

---------

Tenon Intersystems' iTools Mailing List

To unsubscribe: send mail to

itools-request@xxxxxxxxxxxxxxx

with the body only containing:

unsubscribe

Find the searchable mailing list archives

at:

http://itools.blackpepper.co.nz/