Tenon Intersystems Please see text links at bottom of page for navigation
Please see text links at bottom of page for navigation

Search tenon.com

Thanks to:

iTools

Re: iTools 6.x and PHP 4.3.x

To: itools@xxxxxxxxxxxxxxx
Subject: Re: iTools 6.x and PHP 4.3.x
From: Patrick Sneyers <lists@xxxxxxx>
Date: Tue, 29 Jul 2003 22:30:41 +0200
I have the 4.3.0 with iTools 6.5.7 running.
Haven't tried 4.3.2 for which he made a package installer....

Patrick

At 08:32 -0600 29-07-2003, Dan Tappin wrote:
>So are you saying that you currently have iTools 6.5.x AND the Entropy PHP 
>4.3.2 rev5 installed and working?
>
>Dan
>
>On Monday, July 28, 2003, at 04:20  PM, Alexei Zoubov wrote:
>
>>
>>On Friday, July 25, 2003, at 10:39 AM, Eric Yang wrote:
>>
>>>There are some confusions that might need to be cleared up.  iTools 6.5.x 
>>>would overwrite the default Apache.  Therefore, System Preference and other 
>>>utilities could control the states of the webserver.  However, iTools 7 is 
>>>independent from the default Apache, therefore System Preference and other 
>>>utilities are required to have WebServer shut off in order to run iTools 7.  
>>>Therefore, where you hear iTools doesn't mess with default Apache that only 
>>>applies to iTools 7.  (Uninstall iTools 6.5.x will restore your apache to 
>>>the default Apple Apache).
>>>
>>>For PHP 4.3.x package, the entropy's PHP has expats library (XML) compiled 
>>>in as an static library, and iTools 6.5 has compiled expats statically for 
>>>mod_ssl.  Therefore it causes conflict and unable to load entropy's PHP 
>>>library with iTools 6.5.  I would recommend to use iTools PHP package unless 
>>>your PHP program only works with PHP 4.3.x, then you will have to follow 
>>>this paper and compile PHP manually.
>>>
>>>http://www.tenon.com/support/itools6/osx/phpbuild.shtml
>>>
>>>Hope this helps.
>>>
>>>regards,
>>>Eric
>>>
>>
>>I've installed entropy PHP 4.3.2 package with iTools 6.5.7 and until now 
>>didn't have any problems at all.
>>
>>I have a lot of programs already that require PHP 4.3.2 and if pressed for 
>>the choice - I'd better go of iTools.
>>
>>Alexei
>>
>>---------
>>Tenon Intersystems' iTools Mailing List
>>To unsubscribe: send mail to itools-request@xxxxxxxxxxxxxxx
>>with the body only containing: unsubscribe
>>Find the searchable mailing list archives at:
>>http://itools.blackpepper.co.nz/
>
>---------
>Tenon Intersystems' iTools Mailing List
>To unsubscribe: send mail to itools-request@xxxxxxxxxxxxxxx
>with the body only containing: unsubscribe
>Find the searchable mailing list archives at:
>http://itools.blackpepper.co.nz/                              

---------
Tenon Intersystems' iTools Mailing List
To unsubscribe: send mail to 
itools-request@xxxxxxxxxxxxxxx
with the body only containing: 
unsubscribe
Find the searchable mailing list archives 
at:
http://itools.blackpepper.co.nz/                               

<Prev in Thread] Current Thread [Next in Thread>

| Tenon Home | Products | Order | Contact Us | About Tenon | Register | Tech Support | Resources | Press Room | Mailing Lists |

Powered By iTools

Copyright©2003 Tenon Intersystems, 232 Anacapa Street, Suite 2A, Santa Barbara, CA 93101. All rights reserved.
Questions about our website - Contact: webmaster@tenon.com.


Tenon Home  Tenon Home  Tenon Home  Tenon Home Product Info  Tenon Ordering Contact About Register Support Resources Press Mailing Lists