Re: iTools 6.x and PHP 4.3.x

[Dan Tappin <dan_itools001@xxxxxxxxxxxx>]

Hi Eric,

So all I would need to do is disable SSL on the iTools 6.5.x system 
(simply though the iTools web interface) and the 4.3.2 PHP should 
work?

Thanks,

Dan

On Tuesday, July 29, 2003, at 10:40  AM, Eric Yang wrote:

> This could work, if iTools 6.5.x runs without SSL and Entropy PHP 4.3.2.
> So there is no conflict of loading expats (XML library) between the 
> two modules.
>
> regards,
> Eric
>
> On Tuesday, July 29, 2003, at 07:32 AM, Dan Tappin wrote:
>
> > So are you saying that you currently have iTools 6.5.x AND the 
> > Entropy PHP 4.3.2 rev5 installed and working?
> >
> > Dan
> >
> > On Monday, July 28, 2003, at 04:20  PM, Alexei Zoubov wrote:
> >
> > > On Friday, July 25, 2003, at 10:39 AM, Eric Yang wrote:
> > >
> > > > There are some confusions that might need to be cleared up. 
> > > > iTools 6.5.x would overwrite the default Apache.  Therefore, 
> > > > System Preference and other utilities could control the states of 
> > > > the webserver.  However, iTools 7 is independent from the default 
> > > > Apache, therefore System Preference and other utilities are 
> > > > required to have WebServer shut off in order to run iTools 7. 
> > > > Therefore, where you hear iTools doesn't mess with default Apache 
> > > > that only applies to iTools 7.  (Uninstall iTools 6.5.x will 
> > > > restore your apache to the default Apple Apache).
> > > >
> > > > For PHP 4.3.x package, the entropy's PHP has expats library (XML) 
> > > > compiled in as an static library, and iTools 6.5 has compiled 
> > > > expats statically for mod_ssl.  Therefore it causes conflict and 
> > > > unable to load entropy's PHP library with iTools 6.5.  I would 
> > > > recommend to use iTools PHP package unless your PHP program only 
> > > > works with PHP 4.3.x, then you will have to follow this paper and 
> > > > compile PHP manually.
> > > >
> > > > http://www.tenon.com/support/itools6/osx/phpbuild.shtml
> > > >
> > > > Hope this helps.
> > > >
> > > > regards,
> > > > Eric
> > >
> > > I've installed entropy PHP 4.3.2 package with iTools 6.5.7 and 
> > > until now didn't have any problems at all.
> > >
> > > I have a lot of programs already that require PHP 4.3.2 and if 
> > > pressed for the choice - I'd better go of iTools.
> > >
> > > Alexei
> > >
> > > ---------
> > > Tenon Intersystems' iTools Mailing List
> > > To unsubscribe: send mail to itools-request@xxxxxxxxxxxxxxx
> > > with the body only containing: unsubscribe
> > > Find the searchable mailing list archives at:
> > > http://itools.blackpepper.co.nz/
> >
> > ---------
> > Tenon Intersystems' iTools Mailing List
> > To unsubscribe: send mail to itools-request@xxxxxxxxxxxxxxx
> > with the body only containing: unsubscribe
> > Find the searchable mailing list archives at:
> > http://itools.blackpepper.co.nz/
>
> ---------
> Tenon Intersystems' iTools Mailing List
> To unsubscribe: send mail to itools-request@xxxxxxxxxxxxxxx
> with the body only containing: unsubscribe
> Find the searchable mailing list archives at:
> http://itools.blackpepper.co.nz/

---------
Tenon Intersystems' iTools Mailing List
To unsubscribe: send mail to itools-request@xxxxxxxxxxxxxxx
with the body only containing: unsubscribe
Find the searchable mailing list archives at:
http://itools.blackpepper.co.nz/