Re: virtual host problem

[Ron Grayson <ron@xxxxxxxxxxxxxx>]

I had same problem.

Problem: how to get more than one domain to serve off of the server 
with the single or same common IP. Virtual Host by name not IP, right?

Try this:  do not enter the IP in the iTools7 configuration.  Instead 
enter the * symbol (shift 8) on keyboard in place of the IP address 
for each domain. Symbol means any or all. So domain1 listens to any 
incoming as does domain2 etc.

Then apache will do host header and sort the domain out. Remember to 
put in the www.domain.dom alias into the configuration too.

On Tuesday, July 29, 2003, at 05:18  AM, Val Heritage wrote:

> Re: iTools 7.1 on VersionTrackerHas any one else had a problem with adding
> virtual hosts? I am setting up a
> fresh install of iTools 7updated, os10.2.6 and webDNA5.1. I have my DNS on
> another box.  iTools serves everything through IP fine, untill I add the
> first domain name (same IP+ same port). Then, when entering the IP in a
> browser, you get to the folder I set up for the first domain. Should I set
> up a vh for the IP address to go to the root (document folder)- besides the
> DEFAULT host that is already in there?  What else should I consider?
>
> And is there a searchable mailing list out there?
> -Thanks
> Val @ d'Vinci Interactive
> http://www.dvinci.com
>
> ---------
> Tenon Intersystems' iTools Mailing List
> To unsubscribe: send mail to
> itools-request@xxxxxxxxxxxxxxx
> with the body only containing:
> unsubscribe
> Find the searchable mailing list archives
> at:
> http://itools.blackpepper.co.nz/

---------
Tenon Intersystems' iTools Mailing List
To unsubscribe: send mail to itools-request@xxxxxxxxxxxxxxx
with the body only containing: unsubscribe
Find the searchable mailing list archives at:
http://itools.blackpepper.co.nz/