Tenon Intersystems Please see text links at bottom of page for navigation
Please see text links at bottom of page for navigation

Search tenon.com

Thanks to:

iTools

Re: iTools 7 Requires a G4?!?

To: itools@xxxxxxxxxxxxxxx
Subject: Re: iTools 7 Requires a G4?!?
From: Terry Allen <hmag@xxxxxxxxxxxxxx>
Date: Wed, 23 Jul 2003 07:26:37 +1000
At 11:27 AM -0700 7/22/2003, Eric Yang wrote:
It is recommended. If you plan to host multiple virtual hosts, then it's better to have a G4 machine to archive good response time. Hope this helps.

OK, so it's not somehow tied to the G4 processor family. I'm willing to risk trying it on a lowly 600 MHz G3.




regards, Eric

On Tuesday, July 22, 2003, at 11:04 AM, Marconi wrote:

I just went to download iTools 7.0.1 and noted the statement that it requires a G4 400MHz or above. Does it really require a G4?

---------
Hi again,
I've been running iTools 7 since about a week after it's initial release on a blue & white G3 450mHz tower which is the server model. The only thing I have seen with performance is that iTools is slightly slow to get going during boot time - apart from that, it's been running fine & hasn't needed a reboot.
For your own info, I'm running 15 virtual hosts from my machine.
I do have a question for Eric - when a change was made to sendmail under iTools 6.5.x, applying the change restarted sendmail - it doesn't appear to happen when you change sendmail settings under iTools 7 - I haven't checked to see if that happens under other services such as DNS etc... - could we request that this auto restart of sendmail be added to the next system update please.
One final thing - a few people, who like myself had problems with applying a couple of the updates to iTools under 6.5.x, were sceptical that iTools 7 would be able to handle the updates - I can confirm that yes, it does them well, without needing a reboot. It has also done the Apple OSX updates without any problems too. Good news for all I reckon.
--


Bye for now, Terry Allen ___________________________________________________________________
hEARd


Postal Address:
        hEARd, 26B Glenning Rd, Glenning Valley, NSW 2261, Australia
Internet -
        WWW:
        http://heard.com.au or http://www.ozemail.com.au/~hmag
        http://hosting.heard.com.au - http://itavservices.com
Interactive Message Board - http://heard.com.au/wwwboard/
EMAIL: (checked every Thursday & Sunday, sometimes more often)
hmag@xxxxxxxxxxxxxx
Phone: Australia - 02 4388 1400 / International - + 61 2 43881400
Mobile: Australia - 04 28881400 / International - 61 4 28881400
-----------------------------------------------
Non profit promotion for new music - since 1994
-----------------------------------------------
---------
Tenon Intersystems' iTools Mailing List
To unsubscribe: send mail to itools-request@xxxxxxxxxxxxxxx
with the body only containing: unsubscribe
Find the searchable mailing list archives at:
http://itools.blackpepper.co.nz/

<Prev in Thread] Current Thread [Next in Thread>

| Tenon Home | Products | Order | Contact Us | About Tenon | Register | Tech Support | Resources | Press Room | Mailing Lists |

Powered By iTools

Copyright©2003 Tenon Intersystems, 232 Anacapa Street, Suite 2A, Santa Barbara, CA 93101. All rights reserved.
Questions about our website - Contact: webmaster@tenon.com.


Tenon Home  Tenon Home  Tenon Home  Tenon Home Product Info  Tenon Ordering Contact About Register Support Resources Press Mailing Lists