Re: iTools 7 Requires a G4?!?

[Jody McAlister <jodymac@xxxxxxxxxx>]

I set it up as a test on my beige g3 233 mhz with 256 ram and it 
serves fine (while up).  I only serve one virtual domain.  I do run 
into problems whenever I reboot though, it seems every 3 of 4 times 
I've had to jump on the machine and fix something in itools to make 
it run again.  It's running 10.2.6.  This weekend I had a problem 
where the user and I could not get the cache to release, it kept 
serving the old page no matter what.  I turned off cache and it 
stopped serving.  turning cache back on via itools manager did not 
fix it either.

I uninstalled (which by the way did not delete my virtual host 
directories (yea!!! I did back it up in case)), and reinstalled and 
the server booted up just fine.  I did have to re-enter ftp users but 
it recognized that I had a virtual host setup, but I did have to 
re-specify the path for the documents to be served.

So far the new install has been fine and survived a reboot unlike the 
previous install did.


On Tuesday, July 22, 2003, at 11:41 AM, Marconi wrote:

> At 11:27 AM -0700 7/22/2003, Eric Yang wrote:
> > It is recommended.  If you plan to host multiple virtual hosts, 
> > then it's better to have a G4 machine to archive good response 
> > time.  Hope this helps.
>
> OK, so it's not somehow tied to the G4 processor family. I'm willing 
> to risk trying it on a lowly 600 MHz G3.
>
>
> > regards,
> > Eric
> >
> > On Tuesday, July 22, 2003, at 11:04 AM, Marconi wrote:
> >
> > > I just went to download iTools 7.0.1 and noted the statement that 
> > > it requires a G4 400MHz or above. Does it really require a G4?
> ---------
> Tenon Intersystems' iTools Mailing List
> To unsubscribe: send mail to
> itools-request@xxxxxxxxxxxxxxx
> with the body only containing:
> unsubscribe
> Find the searchable mailing list archives
> at:
> http://itools.blackpepper.co.nz/
Jody McAlister
President
In-Site Communications
707-765-9993/800-998-1711

---------
Tenon Intersystems' iTools Mailing List
To unsubscribe: send mail to itools-request@xxxxxxxxxxxxxxx
with the body only containing: unsubscribe
Find the searchable mailing list archives at:
http://itools.blackpepper.co.nz/