|
Search tenon.com
Thanks to:
|
|
iTools
Re: new installation, not serving
If you want it to rain, wash your car.
If you want to figure something out on your own, ask the question to
the help list.
I just checked the Sharing control panel, and somehow Personal Web
Sharing was turned off. Turned it on, and all is well again. Perhaps
this happened after installing the 10.3.2 update.
Terry
I am running iTools as a demo, on OX 10.3. I've successfully set up
WebCatalog, and initially Apache was serving correctly. I copied
over a folder from my other webserver, and it worked great. Then I
started going through the manual and the admin interface, both
web-based and standalone application. Because it comes up early in
the manual, I fooled around with DNS, but turned it off until I had
something real to configure, since I already have a couple of
entries in my existing name server pointing to this Mac's IP address
(one is opal.terryfic.com). I added them to the virtual hosts, and
although the directories were created and everything appears to be
in the right place, the default installed pages aren't being served.
In addition, not even the IP address (http://209.66.15.71) is not
being served. However, the web-based admin interface works like a
champ, and all the pages work from a browser on the webserving
machine itself. I have gone over and over and over, and can't find
anything wrong with my rudimentary set up. I've wasted too much time
looking at the same stuff over and over. Any hints?
Thanks,
Terry Wilson
---------
Tenon Intersystems' iTools Mailing List
To unsubscribe: send mail to itools-request@xxxxxxxxxxxxxxx
with the body only containing: unsubscribe
Find the searchable mailing list archives at:
http://itools.blackpepper.co.nz/
---------
Tenon Intersystems' iTools Mailing List
To unsubscribe: send mail to itools-request@xxxxxxxxxxxxxxx
with the body only containing: unsubscribe
Find the searchable mailing list archives at:
http://itools.blackpepper.co.nz/
|
| <Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Postfix anti-spam, Terry Allen
- new installation, not serving, Terry Wilson
- Re: new installation, not serving,
Terry Wilson <=
- newbie question, Terry Wilson
- Re: newbie question, Mike Schienle
- Re: newbie question, Terry Wilson
- Re: newbie question, Mike Schienle
- Re4: newbie question, Glenn A. Bookout
- Re4: newbie question, Terry Wilson
- P.O/iTools and IPv6 ??, Glenn A. Bookout
- Re: P.O/iTools and IPv6 ??, Olav
- Itools, Server shutting down, Alexei Zoubov
- Re: Itools, Server shutting down, Olav
|
| Tenon Home |
Products |
Order |
Contact Us |
About Tenon |
Register |
Tech Support |
Resources |
Press Room |
Mailing Lists |
|
Copyright©2003 Tenon Intersystems, 232 Anacapa Street, Suite 2A, Santa Barbara,
CA 93101. All rights reserved.
Questions about our website - Contact:
webmaster@tenon.com.
|
|