Re: Prevent apache from listening on an ip-number

[eyang@xxxxxxxxx (Eric Yang)]

Peter,

You might want to check 
/Library/Tenon/WebServer/Configuration/httpd-1.3.conf, with addition 
from your previous changes.
Make sure you don't have another line that says: BindAddress *

In your virtual hosts configuration, make sure you don't have any 
virtual host that uses "*" as their IP address.

regards,
Eric

On Apr 22, 2004, at 9:58 AM, Peter Hampus wrote:

> Well I am keeping this thread alive all by myself ;-)
>
> This is what I have tried now, wchich gave me a scare:
>
> Stopped Apache. Restarted QuickTime Streaming server, and then 
> restarted
> Apache.
>
> Now QTSS shows up instead of Apache in iTools server status page! No 
> virtual
> hosts are working since it looks like QTSS is handling all requests on 
> port
> 80.
> But I have sett QTSS to only listen to the other ip, and apache to 
> listen to
> the first one.
>
> Stopping QTSS and restarting Apache did not set things back to normal. 
> I had
> to prevent QTSS to stream on port 80 for Apache to come back on.
>
> So it looks like Apache wants to bind to both ip numbers and if it can 
> not,
> it fails to start.
>
> What now?
>
> /Peter
>
> On 04-04-22 18.15, "Peter Hampus" <spam@xxxxxxx> wrote:
>
> > I set these values in httpd-1.3.conf but it did not prevent Apache 
> > from
> > listening on the other ip-address:
> >
> > Listen 195.149.138.30:80
> >
> > BindAddress 195.149.138.30
> >
> > What else do I need to change to prevent Apache from "steeling" port 
> > 80 on
> > the other ip address from QuickTime Streaming server?
> >
> > /Peter
> >
> > On 04-04-22 17.55, "Peter Hampus" <spam@xxxxxxx> wrote:
> >
> > > I run iTools 7.2 on an xserve that has two network cards. I want to 
> > > let the
> > > QuickTime streaming server stream content on port 80, and have set 
> > > the
> > > streaming server to only bind to one of the ip numbers for that 
> > > machine.
> > >
> > > I have also set up all virtual hosts to be on the other ip number.
> > >
> > > But Apache answers on both ip numbers.
> > >
> > > I have read about iTools network settings in the user manual but can 
> > > not
> > > find any info on how to prevent iTools Apache to answer on both ip 
> > > numbers
> > > assigned to the machine.
> > > How is that done?
> > >
> > > Regards
> > >
> > > Peter
> > >
> > >
> > > ---------
> > > Tenon Intersystems' iTools Mailing List
> > > To unsubscribe: send mail to
> > > itools-request@xxxxxxxxxxxxxxx
> > > with the body only containing:
> > > unsubscribe
> > > Find the searchable mailing list archives
> > > at:
> > > http://itools.blackpepper.co.nz/
> >
> > ---------
> > Tenon Intersystems' iTools Mailing List
> > To unsubscribe: send mail to
> > itools-request@xxxxxxxxxxxxxxx
> > with the body only containing:
> > unsubscribe
> > Find the searchable mailing list archives
> > at:
> > http://itools.blackpepper.co.nz/
>
> ---------
> Tenon Intersystems' iTools Mailing List
> To unsubscribe: send mail to
> itools-request@xxxxxxxxxxxxxxx
> with the body only containing:
> unsubscribe
> Find the searchable mailing list archives
> at:
> http://itools.blackpepper.co.nz/
--
Tenon Intersystems                              805-963-6983
232 Anacapa Street, #2A                 eyang@xxxxxxxxx
Santa Barbara, CA 93101         http://www.tenon.com

---------
Tenon Intersystems' iTools Mailing List
To unsubscribe: send mail to 
itools-request@xxxxxxxxxxxxxxx
with the body only containing: 
unsubscribe
Find the searchable mailing list archives 
at:
http://itools.blackpepper.co.nz/