Tenon Intersystems Please see text links at bottom of page for navigation
Please see text links at bottom of page for navigation

Search tenon.com

Thanks to:

iTools

Re: iTools upgrade strategy

To: itools@xxxxxxxxxxxxxxx
Subject: Re: iTools upgrade strategy
From: Terry Allen <hmag@xxxxxxxxxxxxxx>
Date: Tue, 27 Apr 2004 13:44:19 +1000
At 2:27 PM -0700 4/26/04, cw@xxxxxxxxxx wrote:
Greetings all,

I have been prepping for a software upgrade, and before proceeding, I need help to come up with a strategy that will cause *no server down-time*. In the past, I would just build a drive at the office with the new software, migrated sites, test it, then swap the drives. I don't have a spare Xserve to test it off-line, I have mission-critical sites, and late-night access is not a good option in this case.

Current Web server set-up:
[Co-located] Xserve Dual 1GB G4, 1GB RAM, OSXS 10.2.4, iTools 6.5.x, WebDNA 4.5.1, sendmail...


[In case it's of use in the equation, the email is on a second Xserve on the same network - with extra IP's and drives available for testing.]

-I have installed a new Xserve drive module, and installed Panther [*client*, updated it to 10.3.3],

...hmmm...surprised to know that Panther client actually works on Xserve.


At any rate, you should be aware that it is important to upgrade iTools 6.5 to iTools 7.x *before* moving to Panther, since iTools 6.x doesn't run on Panther. Further, iTools 7 is designed to upgrade from iTools 6.5 automatically.

So step one would be to upgrade the existing 10.2 iTools 6.5 system to iTools 7.3.
Hi again,
Just a small addition to Anita's & Eric's posts, but a very important one - if you start on the upgrade with the new iTools package, make sure during the process that it gives you the option to upgrade - if it looks like it is going through to do a new install, DO NOT PROCEED & contact Tenon - you should get an option to upgrade. Hope this helps. Of course, make sure you have a backup as well.
--


Bye for now, Terry Allen ___________________________________________________________________
hEARd


Postal Address:
hEARd, 26B Glenning Rd, Glenning Valley, NSW 2261, Australia
Internet -
WWW: http://heard.com.au http://itavservices.com
EMAIL: hmag@xxxxxxxxxxxxxx
Phone: Australia - 02 4388 1400 / International - + 61 2 43881400
Mobile: Australia - 04 28881400 / International - 61 4 28881400
-----------------------------------------------
Non profit promotion for new music - since 1994
-----------------------------------------------
---------
Tenon Intersystems' iTools Mailing List
To unsubscribe: send mail to itools-request@xxxxxxxxxxxxxxx
with the body only containing: unsubscribe
Find the searchable mailing list archives at:
http://itools.blackpepper.co.nz/


<Prev in Thread] Current Thread [Next in Thread>

| Tenon Home | Products | Order | Contact Us | About Tenon | Register | Tech Support | Resources | Press Room | Mailing Lists |

Powered By iTools

Copyright©2003 Tenon Intersystems, 232 Anacapa Street, Suite 2A, Santa Barbara, CA 93101. All rights reserved.
Questions about our website - Contact: webmaster@tenon.com.


Tenon Home  Tenon Home  Tenon Home  Tenon Home Product Info  Tenon Ordering Contact About Register Support Resources Press Mailing Lists