Tenon Intersystems Please see text links at bottom of page for navigation
Please see text links at bottom of page for navigation

Search tenon.com

Thanks to:

iTools

Upgrading to iTools 8 from 7.x

To: itools@xxxxxxxxxxxxxxx
Subject: Upgrading to iTools 8 from 7.x
From: Terry Allen <hmag@xxxxxxxxxxxxxx>
Date: Wed, 29 Jun 2005 19:07:06 +1000
Hi again,
For people who are now wishing to upgrade from earlier iTools versions, I can offer this advice - after your upgrade, if you are currently running SSL, you may find that your system will not start Apache. If you issue the command:


apachectl start

from a terminal, you will possibly see this result:

Syntax error on line 115 of /Library/Tenon/WebServer/Configuration/ssl.conf:
SSLCertificateFile:
file '/Library/Tenon/WebServer/Configuration/ssl.crt/server.crt' does not exist or is empty


This is because you are likely running an IP address style of SSL certificate, labelled something like:

192.168.0.1.crt

The keyfile associated with that certificate may be labelled like so:

192.168.0.1.key

When you restart your iTools server following the upgrade to iTools, Apache is looking for the key & SSL certificate at:

/Library/Tenon/WebServer/Configuration/ssl.conf

You will need to know the location of both the keyfile & certificate file.

From the terminal, issue this command:

pico /library/tenon/webserver/configuration/ssl.conf

Scroll down to line 115 (use CTRL-C to see what line you are on) & change the path listed on that line to the path for your SSL

Then, scroll down to line 123 & change the path to that of your keyfile.

Exit & save by issuing a CTRL-X & then read the prompts to save.

You will also need to change the iTools adminserver configuration to match your SSL certificate & key. To do this, you need to edit the file /library/tenon/adminserver/conf/ssl.conf - lines 127 & 128 on my system to the same paths as above.

After saving that file, reboot your server to ensure that your services start as expected & you should be set. The above applies to people who have also migrated from 6.x, which used the same format of cert & key. Hope this helps.
--


Bye for now, Terry Allen ___________________________________________________________________
hEARd


Postal Address:
hEARd, 26B Glenning Rd, Glenning Valley, NSW 2261, Australia
Internet -
WWW: http://heard.com.au http://itavservices.com
EMAIL: hmag@xxxxxxxxxxxxxx
Phone: Australia - 02 4388 1400 / International - + 61 2 43881400
Mobile: Australia - 04 28881400 / International - 61 4 28881400
-----------------------------------------------
Non profit promotion for new music - since 1994
-----------------------------------------------
---------
Tenon Intersystems' iTools Mailing List
To unsubscribe: send mail to itools-request@xxxxxxxxxxxxxxx
with the body only containing: unsubscribe
Find the searchable mailing list archives at:
http://www.tenon.com/lists/html/iTools/


<Prev in Thread] Current Thread [Next in Thread>
  • Upgrading to iTools 8 from 7.x, Terry Allen <=

| Tenon Home | Products | Order | Contact Us | About Tenon | Register | Tech Support | Resources | Press Room | Mailing Lists |

Powered By iTools

Copyright©2003 Tenon Intersystems, 232 Anacapa Street, Suite 2A, Santa Barbara, CA 93101. All rights reserved.
Questions about our website - Contact: webmaster@tenon.com.


Tenon Home  Tenon Home  Tenon Home  Tenon Home Product Info  Tenon Ordering Contact About Register Support Resources Press Mailing Lists