RE: List Manager response

Hi,

Keep in mind that if you want to run a dynamic DNS server, every time your
connection is restarted a new IP for your DNS server will be provided.
Therefore, every time your IP changes it will take anywhere (these are just
estimates) from 3-5 days to populate everywhere.

Is your objective to just run your website with iTools using Dynamic IP, or
are you trying to set up a dynamic dns server for a particular purpose?  If
it's the former, there is a far more effective (and simpler I might add)
approach to achieve this.  I can walk you step by step if you want to just
run any amount of websites using a dynamic ip with iTools under panther.

Let me know...
Salvador
VetaCom.com


-----Original Message-----
From: J. Atwood [mailto:atwoodjw@xxxxxxxxx] 
Sent: Saturday, July 09, 2005 9:05 PM
To: itools@xxxxxxxxxxxxxxx
Subject: Re: List Manager response

Hello,

This is an issue that has bugging me for a long time! I want to serve
my website from behind a router on a cable connection. To make DNS
work with a dynamic IP, I signed up with DynDNS and got a "Custon DNS"
account. So, in other words, DNS is being handled elsewhere. I also
set up a DMZ so route all traffic to my server.

So my question is, how do I create host-based (not IP-based) virtual
host? I know everything at DynDNS is set up correctly, as I was able
to host easily w/ Mac OS Server 10.3. But with iTools, I'm forced to
enter an IP address. What should I enter? It's dynamic! Right now I
have the server's LAN address (192.168.1.100) entered as the IP. The
funny thing is that people on my LAN can access www.mydomain.com just
fine... it's the people on the other side of te router that can't
connect.

Very strange... any thoughts?

Thanks in advance.
- Jeremiah
---------
Tenon Intersystems' iTools Mailing List
To unsubscribe: send mail to 
itools-request@xxxxxxxxxxxxxxx
with the body only containing: 
unsubscribe
Find the searchable mailing list archives 
at:
http://www.tenon.com/lists/html/iTools/                           

---------
Tenon Intersystems' iTools Mailing List
To unsubscribe: send mail to 
itools-request@xxxxxxxxxxxxxxx
with the body only containing: 
unsubscribe
Find the searchable mailing list archives 
at:
http://www.tenon.com/lists/html/iTools/